JessEm Clear-Cut Router Table Stock Guides

The Evolution Of Your Featherboard - JessEms's New Stock Guide System!

Safety is of the utmost importance when working with your router or shaper table. But the router table application is where most large bits get used and not following safety practices here is just asking for trouble. Until now, feather boards have been the hold-down device of choice for your router table. And while feather boards work well for holding stock in place they do have their limitations. For example, it takes two feather boards (one pushing down and the other pushing in) to get the optimal safety setup and feather board adjustments can be tedious and time-consuming. Finding that perfect angle and correct amount of pressure takes some skill and practice.

Jessem's new Clear-Cut stock guides offer a clearly superior way to safely enjoy using your router and shaper table. Like an extra pair of hands holding your stock while you concentrate on pushing it forward, the Clear-Cut stock guides simultaneously 'press' and 'push' your stock for ultimate precision and safety. The unique one-way guide rollers prevent dangerous kickback and are mounted on a 5-degree angle that pulls your stock tightly against the fence. While steering your stock toward the fence, the urethane guide rollers press down securely, ensuring a rigid setup for chatter-free cutting. The adjustment couldn't be easier, simply loosen one knob, position the Clear Cut stock guide in place, and tighten. They mount to 1/4" T-Slot found on most commercial fences. If your fence doesn't have a 1/4" T-Slot you can still use the Clear-Cut stock guides when you purchase the Fence Mounting Kit. The ideal height of the mounting T-Track is 3-3/8" to 3-5/8" from the table surface to the center of the track. 

Benefits include:

• One way Eurathane rollers prevent kickback
• Rollers simultaneously hold your material down & against your fence
• Attach to any 1/4" t-slot on most router fences
• Purchase the Fence Mounting Kit if your fence does not have a 1/4" t-slot
• Quick adjustment makes setup and fine-tuning a snap
• Machine end-grain with confidence
• 2-3/4" total travel
• Ideal mounting height is 3-3/8" to 3-5/8" from table to center of T-Track.
• Perfect for router or shaper table
• Sold in pairs (one right and one left)

Adapter Kit Makes Mounting JessEm's New Work Hold Quick & Easy!

JessEm's new Clear-Cut Stock Guides are a revolutionary work holding solution for your router or shaper table. The new guides mount to any fence with a standard 1/4" T-Slot or if your fence does not have a 1/4" T-Slot you can purchase this convenient kit. Comprised of two adapter plates and all necessary hardware, this kit allows makes quick work of mounting Jessem's stock guides to any router or shaper fence.

Replacement O-Rings For Clear-Cut Stock Guides

Replace the old, worn-out tires on your Jessem Clear Cut Router or Table Saw Stock Guides with these new replacement tires. OEM spec for size and density these tires will have your stock guides working good as new. One package includes a complete set of 4 tires.