BOW Products Featherboards

Maximium Safety At The Router Table Or Table Saw!

BOW Products featherboards are revolutionary and here's why; their unique design and innovative materials mean this featherboard makes your cuts smoother on the infeed and the outfeed with incredible kickback protection. You'll also dramatically reduce chatter and end up with a better cut. The EVA feathers are non-marring and are specially designed to "hinge" to provide a firm hold on the workpiece with virtually no chance of kickback. Standard feathers provide a stiffer grip on the workpiece while the ultralight feathers are more flexible and softer while still applying sufficient pressure on the workpiece. 

The New AnchorPRO Miter Bar allows you to position multiple featherboards closer together without interference and is much easier to lock in place allowing for faster setup. The included T-bolts fit both the AnchorPRO miter bar and a 5/16"-18 T-Track so you can switch back and forth without dealing with additional hardware. The AnchorPRO Miter Bar is ultra-flexible and fits both 3/8 x 3/4" and 12 x 19mm miter tracks, meaning it fits almost any miter track.

The New Chain Link Knobs are larger and have better ergonomics for a more comfortable grip. The new recessed nut design eliminates the need for washers making reconfiguring your featherboards that much easier by eliminating hardware that is easily dropped and lost. 

FeatherPRO (100-360)

This signature product in the BOW Products lineup comes with Standard EVA feathers already installed. Replacement Standard and Ultralight feathers are available separately. Includes all of the hardware necessary to secure the featherboard to a 3/8"-deep x 34"-wide miter slot or 5/16"-18 T-slot. 

FeatherDUO (100-361)

FeatherDUO stacked featherboards provide additional support for taller workpieces for making smooth, safe cuts. They come with a pair of Ultralight EVA feathers installed. Replacement feathers are available separately. Includes all of the hardware necessary to secure the featherboard to a 3/8"-deep x 3/4"-wide miter slot or 5/16"-18 T-slot  Can be used stacked or individually.

Replacement Feathers (100-362 & 100-363)

These feathers replace worn or damaged feathers on our Bow Products FeatherPRO and FeatherDUO featherboards. The Standard feathers are made from a stiffer, harder EVA material than the "Ultralight" feathers. Standard feathers are for use on a single featherboard or where extra stiffness and support is required. Ultralight feathers are for use on the FeatherDUO stacked featherboards or where a lighter touch is called for.

Replacement Feathers for FencePRO FP4 (100-364)

The FencePRO uses a different style of feathers than the FeatherPRO and FeatherDUO. Each FencePRO feather is replaceable individually, and this four-pack will keep you in business if your feathers start to get worn or chewed up from accidental contact with your blade or bit. 

BOW Products 3-Pc. Woodworker's Safety Package (100-371)

Purchase the money-saving 3-Pc. BOW Woodworker's Safety Package to protect yourself from potential workshop danger. This exclusive package includes the FeatherDUO Double Stack Featherboard (100-361), PushPRO Push Stick (100-368), and a set of PushPRO Replacement Tips (100-369).

BOW Products 3-Pc. Router Table Safety Package (100-372)

This value for money package is like our Woodwork's Safety Package, but geared more toward the router table. This exclusive kit includes the FeatherPRO Featherboard (100-360), PushPRO Push Stick (100-368) and a set of FencePRO FP4 Hold-Down Featherboards (100-376).

FencePRO FP4 (100-376)

The FencePRO contains two standalone featherboards that can be used vertically on any fence equipped with standard t-track. Use them separately on the infeed and outfeed sides of your router bit or saw blade for consistent hold-down pressure and kickback prevention across both sides of the cut. They can also be stacked for heavy-duty concentrated stabilizing force. All necessary mounting hardware is included. 

Features Include:

• Anti-kickback "Living Hinge" design to hold the workpiece and prevent kickback
• Interchangeable feathers allow you to choose between Standard and Ultralight feathers or replace worn feathers
• Shatterproof feathers in case of accidental contact with bits or blades
• Non-marring feathers won't scratch while providing a secure hold on the workpiece
• EVA feathers won't harm carbide cutting edges on bits and blades
• Versatility. FeatherPRO featherboards can be converted for right- and left-hand use depending on the application
• Can be used vertically and horizontally

Uses in the Shop:

• Ripping at the tablesaw
• Guiding the workpiece at the router table
• And more!